bluetooth

Magnetic True Wireless Stereo Speakers

Magnetic True Wireless Stereo Speakers

Magnetic True Wireless Stereo Speakers Setup and Troubleshooting:

 

 

 

Charging your Speaker

Switch off the speakers before charging. Plug the Micro USB cable to speaker (2) and connect the other end to USB charging port. The Red LED indicator light (1) will illuminate to indicate charging.

When charging is completed the red LED indicator light (1) will turn off. Note: Charge the speaker battery fully before use.

 

Using Twin Mode- Setup:

Twin Mode (2 Speakers)

1. Press and hold power button (3) on both speakers simultaneously for 3 seconds. Voice prompt from both speakers will say "Power on, the BT device is ready to pair" and the blue LED indicator will flash.

2. Double click the power button (3) on either speaker, and a voice prompt from both speakers will say "The BT device connected successfully," and the blue LED indicator (1) will stop flashing. Now, the two speakers are connected to each other.

3. Turn on your device and make sure the Bluetooth function is activated. Search for "SR-ECO-BTSP" on your devices wireless list and select it to pair. The speaker will say "The BT device connected successfully" and the blue LED indicator (1) will illuminate.

You can now play music from your device and it will play through the speaker.

Power OFF: Press and hold power buttons on both speakers simultaneously for 3 seconds. Voice prompt from both speakers will say "Power Off" and the blue LED indicator will turn off.

 

Note: The speakers will automatically stay connected to each other after being powered off once they've been previously connected. When ready to use again select "SR-ECO-BTSP" from your devices Bluetooth list again.

 

For Single Mode Setup

Single Mode (One Speaker)

1. Press and hold power button on one speaker for 3 seconds. The voice prompt from the speaker will say "Power on, the BT device is ready to pair" and the blue LED indicator (1) will flash.

2. Turn on your device and make sure the wireless function is activated. Search for "SR-ECO-BTSP" on your device's wireless list and select it to pair. The speaker will say "The BT device connected successfully" and the LED indicator will appear blue.

You can now play music from your device and it will play through the speaker. Note: The speakers can be paired to two different devices. For example, you can connect one of the speakers with your phone and the other with your tablet. The speakers will automatically turn off if they are not paired with a device after 5 minutes. 

 

Troubleshooting:

The sound quality isn't good.

If you notice the sound quality decreasing, the battery needs to be charged. Do not dispose of the product in fire. Do not block the speaker mesh on the front of the housing. Please return for repairs if the product is defective. Do not dismantle it yourself. The warranty is invalid if the product has metal rust, water damage, or other natural oxidation.

 

The speakers won't pair.

Ensure that the speakers are fully charged before beginning. (Total charge time is around two hours.) Turn both speakers off for 15 seconds. Turn them on and follow directions in Twin Mode Setup, above. 

Reading next

SOAR RGX Black LED Pro Gaming Headphones [HP4]
SOAR True Wireless Earbuds V. 4

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.